SAE 100 R6 Textile Reinforced Hydraulic Hose Used for Low Pressure Applications

SAE 100 R6 textile reinforced hydraulic hose is suitable for delivering petroleum or water-based hydraulic fluids and it is mainly used in low pressure conditions. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality black synthetic rubber, which is resistant to oil, abrasion and corrosion. Therefore, the hose is widely used in the delivery of petroleum or water-based hydraulic fluids. The reinforcement is made from one layer of braided textile, making it widely used in low pressure applications. The cover is made from high quality synthetic rubber, which is resistant to abrasion, corrosion, weather, ozone, cut, aging and sunlight. The hose has longer service life as a result.

This is one section of SAE 100R6 steel wire reinforced hydraulic hose, with mark of diameter and working pressure on it.

SAE 100R6 steel wire reinforced hydraulic hose with 3/8" diameter.

Several SAE 100 R6 textile reinforced hydraulic hose assemblies are on the floor.

SAE 100 R6 textile reinforced hydraulic hose assemblies.

Two SAE 100R6 textile reinforced hoses on the table in different diameter.

SAE 100 R6 textile reinforced hydraulic hose sample.

The cross section of SAE 100 R6 textile reinforced hydraulic hose.

SAE 100 R6 textile reinforced hydraulic hose cross section.

Structure: it is composed of three parts: tube, reinforcement and cover.

  • Tube: high quality black oil resistant synthetic rubber.
    • Reinforcement: one layer of braided textile, making the hose lightweight and flexible.
    • Cover: high quality abrasion, corrosion, weather, ozone synthetic rubber.
  • Working temperature: -40 °C to +100 °C.
The specification of SAE 100 R6 textile reinforced hydraulic hose (1)
Hose code Size Dash size ID OD
mm inch min max max
SAE100R6-01 5 3/16 -3 4.2 5.4 10.3
SAE100R6-02 6.3 1/4 -4 5.6 7.2 11.9
SAE100R6-03 8 5/16 -5 7.2 8.8 13.5
SAE100R6-04 10 3/8 -6 8.7 10.3 15.1
SAE100R6-05 12.5 1/2 -8 11.9 13.5 19.0
SAE100R6-06 16 5/8 -10 15.1 16.7 22.2
SAE100R6-07 19 3/4 -12 18.3 19.9 25.4
The specification of SAE 100 R6 textile reinforced hydraulic hose (2)
Hose code Working pressure Proof pressure Min burst pressure Min bending radius Weight
MPa psi MPa psi MPa psi mm kg/m
SAE100R6-01 3.5 510 7 1015 14 2030 50 0.10
SAE100R6-02 2.8 410 5.6 810 11.2 1620 65 0.13
SAE100R6-03 2.8 410 5.6 810 11.2 1620 75 0.15
SAE100R6-04 2.8 410 5.6 810 11.2 1620 75 0.18
SAE100R6-05 2.8 410 5.6 810 11.2 1620 100 0.26
SAE100R6-06 2.4 350 4.8 710 9.8 1420 125 0.34
SAE100R6-07 2.1 310 4.2 610 8.4 1220 150 0.40